Inconel 625 Corrosion Resisting Alloy

[PDF]

INCONEL alloy 625 - Special Metals Corporation

INCONEL ® alloy 625 Physical Constants and Thermal Properties Some physical constants and thermal properties of IN-CONEL alloy 625 are shown in Tables 2 and 3. Low-temperature thermal expansion, based on measure-ments made by the National Bureau of Standards, is shown in Figure 1. Elevated-temperature modulus of elasticity data are given in Table 4.

Inconel® 625 Wire and Bar-Great Stress Corrosion Resistant

Inconel 625 Plate & Wire consist of 23% chromium and bal. nickel, is an oxidation and corrosion resistant alloy with high strength and avoids crevice & pitting corrosion.

Inconel® 625 Nickel Alloy Data Sheet | CMC - Bellwood (800 ...

Excellent Corrosion Resistance of Inconel 625 Alloy: Highly resistant to pitting and crevice corrosion in chloride-bearing environments as well as to impingement corrosion or inter-granular attack. Mineral acids like nitric phosphoric, sulphuric, and hydrochloric acids are highly resisted and corrosive attack prevented; alkalis and organic acid corrosion are also resisted.

INCONEL 625 UNS N06625 - HPALLOY

Inconel 625 is a material with excellent resistance to pitting, crevice and corrosion cracking. Inconel 625 is highly resistant in a wide range of organic and mineral acids. Good high temperature strength. Characteristics. Excellent mechanical properties at both extremely low and extremely high temperatures.

Corrosion behavior of Inconel 625 - Heanjia Super Metals ...

Inconel 625 is known for its strength, outstanding fabrication, welding and excellent corrosion resistance properties. Prevention of corrosion of Inconel alloy 625 at the diverse temperatures and corrosive conditions is the basic need for its extensive acceptance in …[PDF]

Alloy 625 - Corrosion Materials

Alloy 625 is a Ni-Cr-Mo alloy that is used for its high strength, high toughness, and its oxidation and corrosion resistance. Strength of alloy 625 is derived from the stiffening effect of molybdenum

Inconel® 625 - Alloy Wire International

Inconel® 625 Available in any of the 'profile options' A Nickel-Chromium-Molybdenum alloy with excellent corrosion resistance in a wide range of corrosive media, being especially resistant to pitting and crevice corrosion.

Corrosion Materials – Alloy 625

corrosionmaterials› AlloysAlloy 625 / UNS N06625 Description. Alloy 625 is a Ni-Cr-Mo alloy that is used for its high strength, high toughness, and its oxidation and corrosion resistance. Strength of alloy 625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix.

Inconel 625-N06625-2.4856 | NiWire Industries Co., Ltd.

The high alloy content of Inconel 625 enables it to withstand a wide variety of corrosive environments. The alloy is almost completely resistant to mild environments such as the atmosphere, fresh water and seawater, neutral salts, and alkaline media.

Inconel - Wikipedia

Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack.History· [PDF]

P. Ganesan, C.M. Renteria and J. R. Crum Into Alloys ...

stress corrosion cracking. This combination of corrosion resistant characteristics has made the alloy one of the most widely used materials by the chemical and aerospace industries. In this paper the versatility of alloy 625 as a useful material in various corrosive environments will be demonstrated.

Inconel 625 Tech Data - High Temp Metals

Alloy 625 is a nonmagnetic , corrosion - and oxidation-resistant, nickel-based alloy. Its outstanding strength and toughness in the temperature range cryogenic to 2000°F (1093°C) are derived primarily from the solid solution effects of the refractory metals, columbium and molybdenum, in a …

Wear Resistant Alloys: NITRONIC and STELLITE for galling ...

Low alloy version of NITRONIC 60, primarily used for abrasion resistance, or corrosion abrasion requirements. Corrosion and abrasion resistant, tough and durable, NITRONIC 30 is the stainless steel for your abrasive needs.

ALLOY 625 (N06625) - South Coast Industrial Metals

Inconel 625 is a corrosion and oxidation resistant nickel alloy that is used both for its high strength and outstanding aqueous corrosion resistance. Its outstanding strength and toughness is due to the addition of niobium which acts with the molybdenum to stiffen the alloy’s matrix.

Inconel® 625 - Alloy Wire International

Inconel® 625 Available in any of the 'profile options' A Nickel-Chromium-Molybdenum alloy with excellent corrosion resistance in a wide range of corrosive media, being …

inconel 625 - China Phoenix Alloy

Alloy 625 has a high level of pitting and crevice corrosion resistance to chloride contaminated media, such as sea water, neutral salts and brines. Alloy 625 is used in chemical processing, aerospace and marine engineering oil & gas, pollution control equipment and nuclear reactors.

Corrosion Materials – Alloy 625

corrosionmaterials› AlloysAlloy 625 is a Ni-Cr-Mo alloy that is used for its high strength, high toughness, and its oxidation and corrosion resistance. Strength of alloy 625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix.

NAS 625 (UNS N06625) | Corrosion Resistant Alloys | …

NAS 625 (UNS N06625), comparable to Inconel ® 625 Alloy. NAS 625 (NCF 625, UNS N06625) is a nickel-chromium-molybdenum alloy with an additional of niobium. Matrix stiffening provided by molybdenum and niobium results in high strength. The alloy resists a wide range of severe corrosion environments. It also offers resistance to high temperatures.

Inconel 625 Forgings - Inconel 625 High Temp Alloy | All ...

Inconel 625 is a corrosion and oxidation-resistant nickel-base alloy. Inconel 625 alloy is used for heat shields, furnace hardware, gas turbine engine ducting, combustion liners and spray bars, chemical plant hardware and special seawater applications.

Inconel 625 - alloy-ronsco

Inconel 625 is a corrosion and oxidation resistant nickel alloy that is used both for its high strength and outstanding aqueous corrosion resistance. Its outstanding strength and toughness is due to the addition of niobium which acts with the molybdenum to stiffen the alloy’s matrix.

Inconel 625 - Nickel Alloy 625 (UNS N06625) | Altemp ...

altempalloys› Nickel Based AlloysAlloy 625 is a nickel-chromium alloy known and used for corrosion and oxidation resistant, high strength and fabricability. Because of its resistance to corrosion, pressure and heat, Inconel 625 is ideal for applications in the power industry , aerospace , and chemical processing components and hardware and marine industries.

Inconel 625 Alloy - Wire | Elgiloy Specialty Metals

Inconel ® 625 is a Nickel-Chromium-Molybdenum-Columbium (Niobium) alloy with excellent oxidation resistance, corrosion resistance, and strength at high temperatures. Age-hardening treatments are not required to obtain the high strength properties of Inconel ® 625 due to the solid solution effects of molybdenum and columbium on the nickel-chromium matrix.

Inconel 625 - Wikipedia

Inconel Alloy 625 (UNS designation N06625) is a nickel-based superalloy that possesses high strength properties and resistance to elevated temperatures. It also demonstrates remarkable protection against corrosion and oxidation.Chemistry·

Inconel 625 Plate - Triton Alloys Inc

Inconel 625 is a corrosion and oxidation resistant nickel alloy that is used both for its high strength and outstanding aqueous corrosion resistance. Its outstanding strength and toughness is due to the addition of niobium which acts with the molybdenum to stiffen the alloy’s matrix. .

Inconel® 625 - Alloy Wire International

Inconel® 625 Available in any of the 'profile options' A Nickel-Chromium-Molybdenum alloy with excellent corrosion resistance in a wide range of corrosive media, being especially resistant to pitting and crevice corrosion.

Alloy,Corrosion Resistant Alloy - Alloyshop

Alloy / Inconel Corrosion Resistant Alloy Alloyshop. links. My Account; Log In; Search: 0 item ... Inconel 625-Corrosion Resistant Alloy . Product Name Pack Qty Price Qty; Alloy 625 0.025mm thick x 70mm x 70mm 1 £155.00. Alloy 625 0.025mm thick x 70mm x 70mm 2 £176.00.

625 - Rolled Alloys, Inc.

Inconel 625 is a nickel-base alloy used both for its high strength and outstanding aqueous corrosion resistance. The strength of alloy 625 is primarily a solid solution effect from molybdenum and columbium. Alloy 625 has excellent weldability and is frequently used to weld AL-6XN® alloy. Matching filler metals are also used to join dissimilar metals.

Hot Products

We are here to serve you!

Reply to technical consultation Provide design solution Dispatch engineers domestically/abroad Handle complaints thoroughly Systematic training Trouble judgment &amo; removal